KIWIKIT

40 products

  • Fil Tell Tail Spray On Tail Paint 500ml

    Fil Tell Tail Spray On Tail Paint 500ml

    Fil Tell Tail Spray On Tail Paint is an oil based fluorescent paint used for heat detection in cattle. The paint is easy to apply and the vivid colours makes it easy to see your markings. When applied properly the markings can last up to 28 days. Tell Tail Spray On Tail Paint is weather resistant and does not irritate the skin of cattle. Before using Tell Tail Spray on paint, you should ensure your animals are clean and dry and remove any loose hair. Apply the paint in a stripe along the spine (around 15cm long), starting at the head of the tail.

    €11.50

  • Gas Buddex Debudder Refill

    Gas Buddex Debudder Refill (for Calf Debudder)

    PRODUCT INFORMATION Gas refill to be used with Gas Buddex Debudder: 110ml Easy to refill     Animal: Cattle

    €8.50

  • Fil Tell Tail Brush On Tail Paint 1L

    Fil Tell Tail Brush On Tail Paint 1L

    This is an oil based fluorescent tail paint for colour coding or general use. Directions for use Ensure animals are clean and dry before painting. Remove any loose hair. Apply a strip of paint 15cm long by 5cm wide forward along the spine from the tail head. Oestrus activity is indicated by the rubbing, or removal of the paint patch. Tell Tail correctly applied will last approximately 30 days on cows that have not cycled, depending on conditions.   To use this product to its full potential, follow the FIL Mating Management System: 1. Paint all cows with RED paint three weeks after calving. If rubbed, this indicates when the cow has started to cycle again. If the cow has not come into heat after calving you can take remedial action. 2. Paint all cows with GREEN paint immediately prior to commencing your AI programme. Rubbed paint identifies the cows coming into heat on a daily basis. 3. Paint each cow with BLUE paint as soon as she has been AI'd. This will tell you if she has held to the service. 4. Paint all cows with YELLOW when pregnancy is confirmed. Cows with RED paint have not cycled after calving Cows with GREEN paint are waiting to be AI'd Cows with BLUE paint are holding to AI service Cows with YELLOW paint are confirmed pregnant  

    €20.00

  •  -€15.25 Two Colour Refill Kit

    Two Colour Refill Kit

    This Two Colour Refill Kit contains everything you need to get started with the Tailpainter, while easily painting and changing between two colours of tail paint:  Main handle (extends 65 - 115cm) with ergonomic "D handle" grip Parlour Extension (30cm long) Two (2) Applicators Two (2) Refill Bottles / Lids / Caps We recommend using a water-based tail paint.

    €380.25 €365.00

  •  -€9.50 One Colour Refill Kit

    One Colour Refill Kit

    This One Colour Refill Kit contains everything you need to get started with the Tailpainter, painting with one colour faster, safer, and easier than ever: Main handle (extends 65 - 115cm) with ergonomic "D handle" grip Parlour Extension (30cm long) One Applicator One Refill Bottle / Lid / Cap We recommend using a water-based tail paint.

    €249.50 €240.00

  • Fil Tell Tail Brush On Water Base Tail Paint 1L

    Fil Tell Tail Brush On Water Base Tail Paint 1L

    This is an oil based fluorescent tail paint for colour coding or general use. Directions for use Ensure animals are clean and dry before painting. Remove any loose hair. Apply a strip of paint 15cm long by 5cm wide forward along the spine from the tail head. Oestrus activity is indicated by the rubbing, or removal of the paint patch. Tell Tail correctly applied will last approximately 30 days on cows that have not cycled, depending on conditions.   To use this product to its full potential, follow the FIL Mating Management System: 1. Paint all cows with RED paint three weeks after calving. If rubbed, this indicates when the cow has started to cycle again. If the cow has not come into heat after calving you can take remedial action. 2. Paint all cows with GREEN paint immediately prior to commencing your AI programme. Rubbed paint identifies the cows coming into heat on a daily basis. 3. Paint each cow with BLUE paint as soon as she has been AI'd. This will tell you if she has held to the service. 4. Paint all cows with YELLOW when pregnancy is confirmed. Cows with RED paint have not cycled after calving Cows with GREEN paint are waiting to be AI'd Cows with BLUE paint are holding to AI service Cows with YELLOW paint are confirmed pregnant  

    €20.00

  • SupaFlow Milk Filter Socks (100 Pack)

    SupaFlow Milk Filter Socks (100 Pack)

    Supaflow Milk Filter Socks are an essential product for milk producers. Specially designed strainers, Milk Filter Socks are manufactured from a milk filter fabric that will remove impurities from your milk. Run your milk though Milk Filter Socks for milk free from imperfections. Milk Filter Socks will also protect your dairy machinery from particle damage during the milk production and management process. Supaflow Milk Filter Socks come in packs of 100. Available Sizes10.5" x 2.75"12" x 3"17" x 3"26" x 3"24" x 4"

    €16.00

  • Agrihealth Standard Milk Filter Socks

    Agrihealth Standard Milk Filter Socks

     Milk Filter Socks 100 Pack White Manufactured from food grade material and designed to give maximum strength & filtation for high volume milking. Bag of 100 Excellent filtation Maximum strength

    €15.00

  • Express Gas Refill

    Express Gas Refill

    60g gas refill fro Pistol grip & heavy duty dehoners

    €9.50

  • Tail Painter Refill Pack

    Tail Painter Refill Pack

    Tail Painter Refill Pack

    €27.50

  • FIL Uddermark 500ml

    FIL Uddermark 500ml

    Udder Mark Designed for use on udders, Udder Mark's low irritancy formulation ensures there’s no discomfort to the cow. Red to indicate STOP/ ‘don’t milk’ into silo Green to indicate GO / ‘safe to milk’ into silo Vivid colours are clearly identifiable on the udder, even in poor light 360° any way actuator valve for application from any angle Formulated to mark the udder for up to 8 days  

    €10.00

  • FIL Detail 10 Litre Bucket

    FIL Detail 10 Litre Bucket

    Detail 10 Litre Bucket Water based fluorescent tail paint for detection of oestrus activity  •Available in 4 vivid fluorescent colours•Available in 10 litre bucket to refill the Backpack Tailpainter with applicator or to be brushed on.•Quick and easy to apply for oestrus detection•Use to follow the FIL Mating Management System•Lasts up to 28 days subject to conditions and correct application    

    €140.00

  • Teisen Dairy Wipes Refill pack (600 wipes)

    Teisen Dairy Wipes Refill pack (600 wipes)

    Refill pack for the Teisen dairy wipes. these wipes will fit in the Teisen Wipes bucket and be able to be pull through the top of it. Teisen Teat Wipes are premium pre-milking wipes containing Ethanol (19%) and Chlorhexidine Gluconate (0.1%), which are used for quick and efficient cleaning of the teats.Conveniently supplied as refill packs and buckets, which are mounted down the length of the milking parlour, Teisen Teat-Wipes help the milk producer achieve low bactoscan and cell counts.

    €33.00

  • €32.50

  • €11.00

  • 26 x 6″ Filter Sleeves

    €63.00

  • Pair of Ambic Milk Filters

    Pair of Ambic Milk Filters

    Pair of filters for the Ambic flow filter.

    €139.99

  • Ambic Flowfilter Complete

    Ambic Flowfilter Complete

    Milk Filtration SystemThe proven technology of the Ambic FlowFilter gives unsurpassed milk filtation, without the inconvenience and cost of disposable milk socks.   Twin stainless milk filters that won’t rust or corrode   Case with seamless construction and slip resistant grips   Designed and manufactured from the highest quality chemical resistant materials   Superior filter complies with BS5190 and all EU standards   Fully compatable with all milking systems   Protects plate coolers from blockages   Proven over 20 years of service   Full range of spare parts available

    €229.99

  • €199.99

  • Milk filter socks 24 x 4

    €33.99

  • FIL Detail 500ml

    FIL Detail 500ml

    Detail 500ML Applicators  Water based fluorescent tail paint for detection of oestrus activity  •Available in 4 vivid fluorescent colours•Quick an easy to apply for oestrus detection•Use to follow the FIL Mating Management System•Lasts up to 28 days subject to conditions and correct application  

    €14.50

  • €12.00

  • JFC Fast Fill Water Trough 30 gal

    JFC Fast Fill Water Trough 30 gal

    Please allow lead time of up to 7 working days  Fitted with a fast flow float valve (up to 175L p/min @ 3 bar pressure) Easy to transport & move around Manufactured from frost resistant polyethylene Withstands climate conditions ensuring long life span Provide your livestock with fresh, clean and easy accessible water drinking water The yellow, easy-to-access service lid covers a JFC fast-fill float valve which comes with a 3/4inch connection and is capable of delivering up to 175L/min (3 bar pressure). Fast fill valves mean a larger herd can be supplied with water without need for increasing trough sizes. This valve operates in a 'fully on fully off' manner unlike conventional valve which restricts flow and slowly reduces flow until a delayed stop. It is fitted with a drain off for easy emptying and cleaning. This water trough comes with fully adjustable and accessible valves that comply with water safety regulations. It is stable in UV light and easy to clean. JFC's 30 gallon water trough is suited to fit between two fields or pens due to its double reservoirs and central housing design. Water capacity is 136 litres. High quality plastic trough means it can withstand extreme climate conditions ensuring long life span. It is stable in U.V. light and is easy to clean. Suited to sheds and pastures. This trough is easy to transport and move around. Frost resistant polyethylene.

    €125.00

  • Oil filter wrench fast U.46ACL

    Oil filter wrench fast U.46ACL

    Technical info Fast oil-filter wrench - U.46ACL High-strength smooth stainless steel band wrench. Sprung hinged jaw grips filter and provides ratchet effect. Resilient glass fibre reinforced composite handle (resistant to hydrocarbons, impact, etc.). Multi-thread adjustment screw for fast pre-tightening. Dimensions : 290 x 45 x 45 mm. Ratchet effect and 5° increments. Handle length : 175 mm. Ø 66 to 106 mm filters.

    €95.00

  • Deosan Sedilfilta Filter Element Orange

    Deosan Sedilfilta Filter Element Orange

    Replacement filter for the Deosan Sedifilta Milk filter. (orange) Suitable for the 180 micron.

    €99.99

  • Deosan Sedifilta Filter Element Blue

    Deosan Sedifilta Filter Element Blue

    Replacement Filter for the Deosan Sedifilta Milk filter (Blue). Suitable for 120 Micron.

    €125.99

  • Deosan Sedifilta Complete

    Deosan Sedifilta Complete

    Suitable for herds up to 80 cows• Inlet and outlet to suit 32mm delivery line• Manufactured from modern plastics and s/s• Milk flow is out to in• Drains through bottom outlet• Deposits first collect on the exterior of the larger areaouter filter with second filtration through the finer innergauze• Install filter away from diaphragm milk pump.

    €289.99

  • Deosan Major Filter Replacement Top

    Deosan Major Filter Replacement Top

    Replacement top for the Deosan major Filter.

    €89.99

  • Deosan Major Filter pair of Filters

    Deosan Major Filter pair of Filters

    Inner and outer filters for use in Deosan Major Filter. Inner filter gauze = 90 micron. Outer filter gauze = 150 micron.

    €189.99

  • Deosan Major Milk Filter Inner Filter

    Deosan Major Milk Filter Inner Filter

    Inner filter for use in the Deosan major Filter. Gauge is 90 micron.

    €80.00

  • Deosan Major Filter outer Filter

    Deosan Major Filter outer Filter

    Outer filter for use in Deosan Major Filter. Gauze = 150 micron

    €89.99

  • Deosan Major Milk Filter Complete

    Deosan Major Milk Filter Complete

    Suitable for herds up to 150 cows. Capacity can be doubled to 300 by installing 2 filters in parallel. Inlet and outlet to suit 40mm delivery line can be bushed to suit 32mm. Manufactured from modern plastics and stainless steel. Milk flow is out to in. Deposits first collect on the exterior of the larger area outer filter with second filtration through the finer inner gauze. Comes complete with bottom drain outlet. Drained milk is filtered and is suitable for the tank. Filter to be installed vertically with tap at bottom prior to the plate cooler. Diaphragm milk pump or delivery line air purge used, install filter away from pump.

    €280.00

  • Ambic Flow filter Outer Case Only

    Ambic Flow filter Outer Case Only

    Outer Clear case of the Ambic Flow Filter. Ambic Flow Filter can be got complete on our website.

    €68.99

  • Ambic Inner Filter for the Ambic Flow filter

    Ambic Inner Filter for the Ambic Flow filter

    The proven technology of the Ambic FlowFilter gives unsurpassed milk filtation, without the inconvenience and cost of disposable milk socks. Twin stainless milk filters that won’t rust or corrodeCase with seamless construction and slip resistant gripsDesigned and manufactured from the highest quality chemical resistant materialsSuperior filter complies with BS5190 and all EU standardsFully compatable with all milking systemsProtects plate coolers from blockagesProven over 20 years of serviceFull range of spare parts available

    €76.99

  • Ambic Flow Filter Replacement outer Filter

    Ambic Flow Filter Replacement outer Filter

    Outer filter for Ambic Milk Filter.   Designed and manufactured from the highest quality chemical resistant materials   Superior filter complies with BS5190 and all EU standards   Fully compatable with all milking systems   Protects plate coolers from blockages   Proven over 20 years of service   Full range of spare parts available

    €81.99

  • Milk filter socks 26 x 6

    €49.99

Login

Forgot your password?

Don't have an account yet?
Create account